KTL vlog 132 – separating the Evinrude

This is about Dylan Winter's Blog, Promos and dump. Tags:

One Response to “KTL vlog 132 – separating the Evinrude”

  1. 9 August, 2011 at 11:32 amChuck Yahrling - O'Day 20 in Searsport, Maine US says:

    My guess is that the shifter rod is corroded at the coupler and so is sticking. Can you take the screw all the way out and flood with WD-40 as a rust dissolver solvent? Soaking, waiting, and a few a few light taps might help. According to my Cheap Outboards book the instructions you have seem correct. Lining up the mentioned pin lets you pull the lower unit down a bit more, but you appear to be past that point.

    (My 3.0 HP has no shifter so it just pulls apart. )

    Any rate, use anti-seize when reassembling all parts. Not the copper type, tho.

Leave a Reply to Chuck Yahrling - O'Day 20 in Searsport, Maine US